home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
EnigmA Amiga Run 1995 November
/
EnigmA AMIGA RUN 02 (1995)(G.R. Edizioni)(IT)[!][issue 1995-11][Skylink CD].iso
/
earcd
/
gfx
/
scancent.lha
/
Catalogs
/
english
/
ScanCenter.catalog
(
.txt
)
Wrap
Amiga IFF Catalog
|
1995-08-03
|
6KB
|
224 lines
FCTLGFVER
)$VER: ScanCenter.catalog 1.0 (02-Aug-95)
english
Black/White thresholded
Black/White dithered
Black
White
Grayscale 16
Grayscale 256
8 colors thresholded
8 colors dithered
True Color
Fast B/W thresholded (OCR)
Fast B/W dithered (OCR)
Fast Grayscale 16
Save Preferences
Load Preferences
Project
2SCANNERERROR:
I/O Channel not installed properly.
1SCANNERERROR:
Data transfer terminated in error.
|SCANNERERROR:
String was send to the InquireNumber procedure
nor al value inquire was send to the InquireString procedure.
FSCANNERERROR:
Inquire response not properly formatted by the scanner.
QSCANNERERROR:
An inquire for nonsupported parameter
was received by the scanner.
SCANNERERROR:
Scanner is busy.
2SCANNERERROR:
Escape sequence has illegal format.
SSCANNERERROR:
Escape sequence has proper format
but the funktion is not supported.
ISCANNERERROR:
Scan window specified and scannable area do not intersect.
-SCANNERERROR:
Parameter value out of bounds.
*SCANNERERROR:
Scale factor out of bounds.
oSCANNERERROR:
A downloadable dither pattern was selected
but not downloaded before requesting a dithered scan.
WSCANNERERROR:
A downloadable tone map was selected
but not downloaded before scanning.
QSCANNERERROR:
The lamp did not reach the required intensity
for proper scanning.
0SCANNERERROR:
Paper jam in the document feeder.
ASCANNERERROR:
Scanner element failed to reach the home position.
:SCANNERERROR:
Unrecognized error reported by the scanner.
cSCANNERERROR:
A downloadable Matrix coefficients were selected
but not downloaded before scanning.
*SCANNERERROR:
No paper loaded in the ADF.
GROSSCALIB
ERROR:
Not enough memory.
ERROR:
reached end of zoom.
?ERROR:
by converting graphics
scanmode not avaible in preview.
VScreenmode was changed between graphicscard and amiga output.
Scanning preview again.
mERROR:
Can`t open preview window.
Dimensions too large.
Set size in [ Size preview window ] to lower bounds.
#ERROR:
Can`t open sztartup window.
"ERROR:
Can`t open preview window.
Iff ILBM
Sunraster
Iff Deep (only 24 bit)
PPM (only 24 bit)
User defined
Red, Green, Blue NTSC
Black and white NTSC
Red, Green, Blue
Red - filter
Blue - filter
Auto - filter
2-pixel - filter
4-pixel - filter
filter off
User defined
Coarse Fatting
to ram
to drawer
Dots per inch and scaling
X dpi
Y dpi
Diverse
Negative
Mirror
Brightness
Contrast
Edit gamma curve
Use gamma curve
Save format
Preview
Scan mode
Matrix,filter & ditherpattern
Matrix coeffizient
Color - Pattern
2Edit user defined patterns and matrix coeffizient
Unit
Path scanbuffer
Extern viewer
Extern viewer on/off
Size preview window in %
Scanmode selection for preview
Edit gamma curve
Add point
Delete point
Save curve
Load curve
Preview picture
Loadable Patterns
B/W Coarse Fatting
B/W Fine Fatting
B/W Bayer Dither
B/W Vertical Line
Color Coarse Fatting
Loadable matrixes
Black and white NTSC
Red, Green, Blue
Red - filter
Blue - filter
4This funktion is not supported in the DEMOVERSION !
.ERROR:
File
n has the wrong dataformat !
!ERROR:
Can`t open file
_OK*|_WHAT!!!
_Save|*_Cancel
GFile
n exists.
The file is overwritten in case of selecting save.
/ERROR:
File
n has the wrong dataformat !
USaveformat
n only for 24 bit true color.
Choose
n or
n as saveformat.
HFile
n exists.
The file ist overwritten in case of selecting scan.
_Scan|*_Cancel
ERROR:
Can`t save palette.
!ERROR:
Can`t set saveattributes.
JERROR:
It must installed a "multipic.library"
with version 3.0 or higher.
QERROR:
Tooltypes incomplete or wrong !
DEVICE = (SCSI.DEVICE)
UNIT = (SCSI_UNIT)
TERROR:
The connected SCSI unit is a no known scanner.
Please ckeck your tooltypes !
"ERROR:
No response from scanner !
ERROR:
Error in datastream !!
Black white dither pattern
Color dither pattern
Red green blue
Green
delete pattern
load from scanner
rotate left
rotate right
roll left
roll right
roll up
roll down
copy pattern
paste pattern
User defined
Pattern
load from scanner
Matrix Coeffizient
,User defined pattern and matrix coeffizient
Preview complete
Preview area
Scan area and save
Size of rawdata
Preview scanned in %ld dpi
Preview
Edit pattern
Scan mode (real)
Scan mode (preview)
Width
Height
About
|ScanCenter 1.0
Copyright by Uwe Konrad
Bahnhofstrasse 78
32584 Loehne
bThe GUI was designed with
MUI from STEFAN STUNTZ
bOne moment please !
Initializing by scanner.
]ERROR
Can`t open %s Unit %d !
Check your tooltypes.
Be sure the scanner is connected and on.